C10200 Copper Seamless Tube Size : 4 to 150mm
C10200 Light Drawn Tube Length: 1-6 meter / Custom
ASTM C10200 Light Annealed Tube
Standards : ASTM B280, ASTM B75
C10200 Bright Annealed Tube Types: Light Annealed, Hard Drawn, Light Drawn,
Bright Tube
Table of Content
C10200 Copper Tube Specification
C10200 Copper Seamless Tube
Size
C10200 Oxygen Free Full Annealed Tube
Shape
ASTM C10200 Light Annealed Tube
Standards
C10200 Bright Annealed Tube
Thickness
C10200 Material Annealed Tube
Temper
C10200 Material Annealed Tube
Types
C10200 Light Drawn Tube
Length
UNS C10200 Hard Drawn Tubes Uses
C10200 Copper Seamless Tube Manufacturing Method
NS C10200 Copper Seamless Tube Price List
| Size's | Price in USD |
|---|---|
| 1/2 "(Hb) 1.125 x.1953 x 144 | US $ 10.94 |
| Od - 1/2" x 0.89 mm (Thk) | US $ 27.01 |
| Od - 1/4" x 0.36 (Thk) x 20 (Swg) | US $ 32.66 |
| Od - 19.05 mm x14 (Bwg) | US $ 17.36 |
| Od - 17 mm x 3 mm (WT) | US $ 26.64 |
| 50mm x 8 (Swg) x 7 (Mtr.) | US $ 18.82 |
C10200 Light Drawn Tube Thickness Chart
| Tube Size (Inches) | Wall Thickness (Inch) |
|---|---|
| 0.250" | 0.032 |
| 0.375" | 0.032 |
| 0.500" | 0.032 |
| 0.500" | 0.035 |
| 0.625" | 0.035 |
| 0.750" | 0.035 |
| 1" | 0.040 |
| 1.250" | 0.049 |
C10200 Copper Seamless Tube
C10200 Light Drawn Tube
ASTM C10200 Light Annealed Tube
C10200 Bright Annealed Tube
C10200 Material Annealed Tube
C10200 Oxygen Free Full Annealed Tube
UNS C10200 Hard Drawn Tubes
ASTM C10200 Light Annealed Tube Chemical Composition
Pure Copper
Oxygen
C10200 Bright Annealed Tube Mechanical Properties
| Properties | Values | Condition |
|---|---|---|
| N/mm2 - Tensile Strength | 260 Max | O |
| N/mm2 - Tensile Strength | 290 Min | 1/2H |
| N/mm2 - Tensile Strength | 350 Min | H |
| Elongation in 5.65 Cross sectional area | 32 Min | O |
| Elongation in 5.65Cross sectional area | 4 Min | 1/2H |
C10200 Copper Tube Supplier in India, Provides High Temperature Resistant Products That Will Perform Good in Applications
UNS C10200 Material Annealed Tube Thermal Properties
| Thermal Properties | English | Metric |
|---|---|---|
| Melting Point | 1981 °F | 1083 °C |
| CTE, linear | 9.61 µin/in-°F @Temperature 68.0 - 392 °F |
17.3 µm/m-°C @Temperature 20.0 - 200 °C |
| 9.83 µin/in-°F @Temperature 68.0 - 572 °F |
17.7 µm/m-°C @Temperature 20.0 - 300 °C |
|
| 9.44 µin/in-°F @Temperature 68.0 - 212 °F |
17.0 µm/m-°C @Temperature 20.0 - 100 °C |
|
| Thermal Conductivity | 2710 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
391 W/m-K @Temperature 20.0 °C |
| Annealing Point | >= 700 °F | >= 371 °C |
| Specific Heat Capacity | 0.0920 BTU/lb-°F @Temperature 68.0 °F |
0.385 J/g-°C @Temperature 20.0 °C |
C10200 Oxygen Free Full Annealed Tube Fabrication Properties
| Alloy | Technique for Joining | Level of Suitability |
|---|---|---|
| C10200 Copper Tube | Welding of Gas Shielded Arc | Good |
| Capacity of Being Hot Formed | Excellent | |
| Brazing | Excellent | |
| Welding of Oxyacetylene | Fair | |
| Welding of Coated Metal Arc | Not Recommended | |
| Seam Weld | Not Recommended | |
| Capacity for Being Cold Worked | Excellent | |
| Welding Spot | Not Recommended | |
| Rating for Machinability | 20 | |
| Soldering | Excellent | |
| Weld for Butt | Good | |
| Rating of Forgeability | 65 |
UNS C10200 Hard Drawn Tubes Equivalent Grades
| Standard's | Value'a | Countries |
|---|---|---|
| GB | TU1 | China |
| EN | Cu-OF | Europe |
| UNS | C10200 | - |
| DIN CEN/TS 13388 | CW008A | Germany |
| JIS | C1020 | Japan |
| BS | C102 | England |
| Description | C10100 | C10200 |
|---|---|---|
| Copper | 99.99% Pure | 99.95% Pure |
| Cost | More Expensive | Less Expensive |
| Conductivity | Electrical Conductivity are Better | Electrical Conductivity are Less |
| Certification | Certified Oxygen Free | Certification are Not Required |
| Category | Comes Under Oxygen Free Electronic Category | Comes Under Oxygen Free Category |
| Strength | Mechanical Properties are Less | Mechanical Properties are Better |
C10200 Light Drawn Tube Size Chart
| Nominal Wall Size's (Inch) | Outside Diameter (O.D.) (Inch) |
|---|---|
| 0.125" | 0.625" |
| 0.065" | 0.875" |
| 0.032" | 0.750" |
| 0.062" | 0.750" |
| 0.125" | 0.500" |
| 0.032" | 0.875" |
ASTM C10200 Light Annealed Tube Physical Properties
| Solidus - Melting Point | 1981⁰F |
|---|---|
| Density at 68⁰F | 0.323 lb/cu in. |
| Specific Gravity | 8.94 |
| Thermal Conductivity at 68⁰F | 226 Btu/sq ft/ft hr/ ⁰F |
| Modulus of Rigidity | 6400 Ksi |
| Modulus of Elasticity in Tension | 17000 Ksi |
| Liquidus - Melting Point | 1981⁰F |
| Electrical Conductivity IACS at 68⁰F | 101% |
| Coefficient of Thermal Expansion 10-6 per (68-212 ⁰F) | 9.4 |
| Specific Heat Capacity at 68 ⁰F | 0.092 Btu/lb/⁰F |
| Coefficient of Thermal Expansion 10-6 per (68-392 ⁰F) | 9.6 |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-572 ⁰F) | 9.8 |
C10200 Bright Annealed Tube Applicable Specification
| Form | Standard | System | Specific Sub-Form | Application |
|---|---|---|---|---|
| Tube, water | B88 | ASTM | - | - |
| Pipe | B188 | ASTM | - | Bus Bar |
| B42 | ASTM | Seamless | - | |
| SB42 | ASME | - | - | |
| B698 | ASTM | - | - | |
| B88M | ASTM | - | - | |
| Seamless Condenser Tube & Ferrule Stock | SB111 | ASME | - | Condenser Tube |
| Tube | B698 | ASTM | - | - |
| MIL-T-24107 | MILITARY | - | - | |
| MIL-T-24107 | MILITARY | - | - | |
| J463 | SAE | - | - | |
| B395/B395M | ASTM | - | - | |
| SB75 | ASME | - | - | |
| B359/B359M | ASTM | - | - | |
| J461 | SAE | - | - | |
| B188 | ASTM | - | Bus Bar | |
| J463 | SAE | - | For Air Conditioning And Refrigeration Field Servi | |
| B372 | ASTM | - | Rectangular Waveguide | |
| B743 | ASTM | - | - | |
| B447 | ASTM | - | - | |
| J461 | SAE | - | For Air Conditioning and Refrigeration Field Servi | |
| B640 | ASTM | - | - | |
| SB359 | ASME | - | - | |
| MIL-T-3235 | MILITARY | - | - | |
| B280 | ASTM | - | - | |
| J461 | SAE | - | - | |
| B716 | ASTM | - | - | |
| B75/B75M | ASTM | - | - | |
| B641 | ASTM | - | - | |
| SB395 | ASME | - | - | |
| B641 | ASTM | - | - | |
| MIL-W-85 | MILITARY | - | Rectangular Waveguide |
UNS C10200 Material Annealed Tube HSN Code
| Grade | HSN Code |
|---|---|
| C10200 Copper Tube | 7411 |
C10200 Copper Tube Manufacturer in India, Providing High Performance Design for ensuring durability in Various industries.
C10200 Oxygen Free Full Annealed Tube Fabrication Processes
UNS C10200 Hard Drawn Tubes Features
C10200 Copper Seamless Tube Testing
UNS C10200 Light Drawn Tube Manufacturing Process
C10200 Copper Tube Applications
Advantages for Buyers to Buy Stocks of C10200 Copper Tube Form Mumbai, India